TANDBERG 700 MXP user manual Connecting the system to Isdn using NT1 network adapters, Configuring

Models: 700 MXP

1 307
Download 307 pages 30.22 Kb
Page 280
Image 280

TANDBERG 7000 MXP

6.10 Appendix 10

Connecting the system to ISDN using NT1 network adapters

Connecting

Connect the first ISDN cable from ISDN 1 on the system to the S-interface on your first NT1 network adapter. Connect the other ISDN cables to the appropriate NT1 network adapters. Connect the U-interface of your NT1 adapter to the line provided from your network provider.

For convenience the NT1 adapters could be placed inside the cabinet. If needed, use the shorter ISDN cable (RJ45 connectors) delivered with the NT1 between the codec and the NT1 and the longer ISDN cable between the NT1 and the connector (RJ45) at the wall socket.

Configuring

The configuration of the system is performed in the same manner as described in ISDN BRI Settings.

The NT1 should be powered up and you should check that the network is active. Please check your NT1 User Manual.

266

Page 280
Image 280
TANDBERG 700 MXP user manual Connecting the system to Isdn using NT1 network adapters, Configuring