
TANDBERG 7000 MXP
Far End Camera Control
| On |
| The far end will be able to: |
|
|
|
| • Control your camera |
|
|
|
| • Select your video sources |
|
|
|
| • Activate your camera presets |
|
|
|
| • Request snapshots |
|
|
|
|
|
|
|
|
|
|
|
| Off |
| The far end can access none of the four features above on the local system. You will |
|
|
|
| however still be able to control the camera on the far end. |
|
|
|
|
|
|
Fallback to Telephony
When dialing a number and the system fails to place a video call to the number dialed, the system will attempt to place a telephone call if Fallback to Telephony is enabled.
| On |
| Enables fallback from video calls to telephone calls. |
|
|
|
|
|
|
|
|
|
|
|
| Off |
| Disables fallback. |
|
|
|
|
|
|
Far End ISDN System Upgrade
It is possible to upgrade software remotely, i.e. a far end system may upgrade software on a local system via http on ISDN. The system to be upgraded must be configured to allow remote software upgrade. It is possible to set a password which is needed for the far end system to be able to accomplish the software upgrade.
| On |
| The system will allow a remote system to upgrade local software. |
|
|
|
|
|
|
|
|
|
|
|
| Off |
| The system will not allow a remote system to upgrade local software. |
|
|
|
|
|
|
Note that the configuration can also be done via the telnet or the serial port.
Maximum Call Length (minutes)
This feature will automatically end both incoming and outgoing calls when the call time exceeds the specified Max Call Length. Max Call Length can have the following values:
120