TANDBERG 700 MXP user manual Description of the different files, Custom logos

TANDBERG 7000 MXP

6.6 Appendix 6

Using the file system

It is possible to access a file system within the TANDBERG system by using ftp:

DOS-	ftp <IP-address of system>, or
window:
Web-	ftp:// <IP-address of system>
browser:
Description of the different files:
all.prm	all settings in the system (including directory)
dir.prm	directory entries (up to 200 entries)
event.log	logs fault situations etc.
sw.pkg	the system software
globdir.prm	file containing up to 400 entries. These entries can not be edited from the
	system, but can be edited as a text-file.

Files accessible only by ‘ftp get /tmp/snapshots/xxx.jpg’ or ‘http://<IP-address of system>/tmp/snapshots/xxx.jpg’:

site0.jpg	Snapshot of current stream if MultiSite.
main.jpg	Snapshot of selfview.
site1.jpg	Snapshot of decoded stream if point-to-point.
duo.jpg	Snapshot of the encoded stream if transmitting DuoVideo, the decoded stream if
	receiving DuoVideo.

Custom logos

ƒGo to the folder where your logo is located.

ƒType “ftp <IP-address of your local system>”.

ƒGo to the user folder, type “cd user”.

ƒUpload the logo, type "put <logo.jpg>".

The new logo will be displayed the next time you restart your system. Recommended maximum size is: 704x576, file-format: jpg. If the file is too large, no logo will be displayed.

262