TANDBERG 700 MXP user manual Picture Control

General Use

3.10.5Picture Control

Focus, Brightness and White balance are set for auto focus, auto brightness and auto white balance by default. If you need to set focus, brightness and white balance manually, go to Picture Control in the Camera Control menu.

Focus

Auto			Auto focus continuously updates the focus throughout the call. When moving
			the camera, the system will use auto focus for 5 seconds to set the right focus
			of the new camera position. After 5 seconds auto focus is turned off to prevent
			continuous focus adjustments of the camera.
Temporary			When Temporary is selected, the slide bar is enabled. Use the arrow keys to
			adjust the focus. The temporary focus will last until you move the camera again
			and auto focus will take effect.
Camera Brightness
Auto	Auto brightness continuously updates the brightness of the camera picture.
Manual	When Manual is selected, the slide bar is enabled. Use the arrow keys to manually
	adjust the camera brightness. If brightness is set manually, the system will keep
	this brightness level also when the camera is moved.
White balance
Auto		Auto white balance continuously updates the white balance.
Manual		When Manual is selected, the “Set White balance” field is enabled. To update the
		white balance manually, select Manual. A white object should be held in front of
		the camera a few seconds before and after pressing “Set White balance”. If white
		balance is set manually, the system will keep this white balance also when the
		camera is moved.

Monitor Brightness

Brightness Adjust monitor brightness left from 0-16.

Left

Brightness Adjust monitor brightness right from 0-16.

Right

69