TANDBERG 7000 MXP

The DNAM Loudspeaker Cabinet (Center Speakers)*:

ƒ3-way Center Speaker system

ƒFrequency range 50Hz - 20kHz

ƒ2 x 130mm low- and midrange loudspeakers, 8 ohms nominal, high quality

ƒ1 x 25mm dome tweeter, 6 ohms nominal, high quality

ƒCrossover filtered audio signals received from DNAM amplifier

ƒLong time max power 90 Watt on all loudspeakers

ƒEnclosed MDF speaker cabinet

Integrated Stereo Speakers**:

ƒ2 * 15W Stereo Speakers, high quality

ƒFrequency range 100Hz - 20kHz

ƒEnclosed MDF speaker cabinet

Using the external and optional Stereo Speaker Kit will improve the stereo sound, even on systems with integrated stereo speakers**. Note that the kit is not available for Mini-DNAM described below. Before connecting the Stereo Speaker Kit, make sure the complete videoconferencing system is powered down. When connecting the Stereo Speaker Kit to a system with already integrated stereo speakers, these integrated speakers will be disabled, and a new filter and specification setup is loaded when powering up the videoconferencing system.

Please refer to the section Stereo Speaker Kit for details.

TANDBERG 3000 MXP Profile:

The TANDBERG Mini-DNAM*:

The Mini-DNAM audiosystem is built on two specially designed and separate modules; the Mini- DNAM amplifier and the Mini-DNAM loudspeaker cabinet. The Mini-DNAM loudspeaker cabinet is stereo-configured and based on two versions made for fitting both the TANDBERG 3000 Profile 43’’ and 32’’ systems. The compact sized amplifier is mounted in the rear of the speaker cabinet.

The Mini-DNAM amplifier*:

The Mini-DNAM amplfier specification:

ƒ Stereo digital SPDIF input ƒ 2x30W into 8ohm

ƒ External DC power supply ƒ Compact size

238

Page 252
Image 252
TANDBERG 700 MXP user manual Dnam Loudspeaker Cabinet Center Speakers, Integrated Stereo Speakers, Tandberg Mini-DNAM