TANDBERG S3 manual Setting up Multicast Delivery

Models: S3

1 127
Download 127 pages 50.22 Kb
Page 65
Image 65

Setting up Multicast Delivery

TANDBERG CONTENT SERVER ADMINISTRATOR GUIDE

Prerequisites

Basic Setup—It Only Needs to Be Done Once

Before you can start delivering your live content as a multicast stream you need to check that:

Your network is multicast- enabled.

The IP address under Destination multicast IP address and port is correct and modify it if necessary.

You have configured a multicast delivery server.

Verify the IP address under Destination multicast IP address.

Select Category Multicast streaming.

Remote Desktop into

 

Click on Manage this

your Content Server

 

streaming media

and choose Manage

 

server.

Your Server from the

 

 

Start Menu.

 

 

 

 

 

Right-click on WMS Multicast Data Writer and select Properties from the drop-down menu. Verify that the IP address under Destination multicast IP address and port is correct and modify it if necessary.

Expand the list next to the name of your streaming media server, then expand the list of Publishing Points.

SelectTCSmulticastTemplatethe Publishing Point and click on the Properties tab.

Please note that the Content Server will use the first two octets of the IP address, but it will dynamically assign the last two octets, eg. if an IP address like 10.0.1.1 is specified, TCS may use any addresses in the 10.0 range for multicast streaming. If all your multicast streams originate from a Content Server, you may pick an IP range when you set up your multicast network, and tie it to the TCS.

Configure a multicast delivery server:

Go to Administrator Settings > Media Servers to add a Windows Media Streaming

Server and configure it as follows:

Enter a descriptive name for the server

Enter ‘(local)’ in the Address field

Select Support Live Streaming

Select Server push

Enter 8080 in the Port field

Publishing Points: Select Create new using settings from existing and enter TCSmulticastTemplate in the Main and Dual fields

Live URLs:

Select Use alternate live URLs and enter http://(local)/tcs/data in the Main and Dual fields.

Select the checkboxes to have file names appended to the URL

Once you have successfully completed the basic setup, you can use the multicast delivery server you have configured and select it in the Live Media Server Settings section of your templates.

Table of

 

Disclaimers,

 

Safety,

 

Introduction

 

Installation

 

Quick Setup

 

Operation

 

Backup and

Administrator

Conference

 

View

 

Appendices

Contents

 

Patents etc.

 

Environmental

 

 

 

 

 

Restoring

Settings

Setup

 

Conferences

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D13898.05

 

 

 

 

 

 

 

65

 

 

 

 

 

 

 

 

 

DECEMBER 2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 65
Image 65
TANDBERG S3 manual Setting up Multicast Delivery, Prerequisites Basic Setup-It Only Needs to Be Done Once