Examples of Front Panel Operation
TANDBERG CONTENT SERVER ADMINISTRATOR GUIDE
Set the IP Address to Static
We strongly recommend that you change the IP address from DHCP to Static once the Content Server is in production.
Example 1: Setting the IP Address Type
Use the examples on this page together with the diagram on the previous page to set the IP address.
To set the subnet mask, default gateway and DNS IP addresses, follow the steps described below.
Press Enter to produce the menu. The display shows two lines at a time:
The upper line is the menu title (as shown here) or a text describing a submenu or the setting shown (as in the example to the right). The settings available can be displayed one by one (the upper line is
Selecting IP Settings
IP Settings
Address Type
IP Address
Subnet Mask
Default Gateway
DNS (Preferred)
DNS (Alternate)
>Address Type
Use the Arrow keys to scroll up and down and have the settings shown displayed one by one. The menu title will be retained.
Press Enter twice to enter the submenu:
Static
Use the Arrow keys to scroll down to Static.
Press Enter to put the change into effect and proceed to specify the IP address.
retained) by scrolling up and down.
The IP Settings has six submenus. Use the Arrow keys to locate Address Type
Example 2: Setting the IP Address Itself
Press Enter to produce the menu. The display shows two lines at a time:
The upper line is the menu title (as shown here) or a text describing a submenu or the setting shown (as in the example to the right). The settings available can be
Selecting IP Settings
IP Settings
Address Type
IP Address
Subnet Mask
Default Gateway
DNS (Preferred)
DNS (Alternate)
>IP Address
Use the Arrow keys to scroll up and down and have the settings shown displayed one by one. The menu title will be retained.
Press Enter to enter the submenu:
Press Enter to edit the address.
The first digit will now blink.
Use the Arrow keys to scroll through the numbers
Press Enter to bypass any digit not in need of adjustment.
When all digits have been set pressing Enter will produce the Save Changes menu.
Use Arrow keys to select applicable option.
Use Enter to exit the menu putting changes into effect.This will take you back to the IP Settings menu.
If you need to change other settings repeat the procedure selecting the applicable IP Setting submenu (e.g. Default Gateway) first.
displayed one by one (the upper line is retained) by scrolling up and down.
The IP Settings has six submenus. Use the Arrow keys to locate IP Address
then start to blink.
Repeat until the final digit has been set.
Use Return to leave a menu undoing any changes. This will also take you back to the IPSettingsmenu.
Table of |
| Disclaimers, |
| Safety, |
| Introduction | Installation | Quick Setup |
| Operation |
| Backup and |
| Administrator |
| Conference |
| View |
| Appendices |
Contents |
| Patents etc. |
| Environmental |
|
|
| Restoring |
| Settings |
| Setup |
| Conferences |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D13898.05 |
|
|
|
|
|
| 18 |
|
|
|
|
|
|
|
|
|
|
| ||
DECEMBER 2007 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
