fig. 13
Only mod. C007
fig. 14
fig. 15
fig. 16
11 - ENGLISH
wear, make it run only for the time necessary to cleaning .
4.Counterclockwise turn the tap to remove it: a) draw out the dispensing cock and disassemble it (pict 13); b) remove the sleeve by drawing it outwards and take the labyrinth out (pict 14); c) clockwise turn the pump to extract it from its seat. Accurately wash.
5.Disassemble the pump according to the following instructions: a) unscrew the two knobs; b) remove the cover (pict 15); c) draw the rotor with the scrapes out; d) take the shutter and the rubber
6.To mount the pump again, follow the opposite sequence, remember to apply a thin layer of specific lubricant on the rotor.
7.Empty the tank of the detergent, rinse with a plenty of water and then sanitize. Before restart the production of whipped cream, completely drain the sanitizer.
8.Mount the cock, the sleeve, the labyrinth and the pump on the machine again.
9.Press the pushbutton ON/OFF so that both leds are lighted up.
-To preserve plastic components and the rotor, never make use of solvents and/or diluents during washing.
-Chemical products for sanitization shall be used according to the standards in force and with utmost caution.
-After each sanitization, do not touch sterilized parts with hands, towels, sponges or others.
-Avoid to use the pump dry.
-Avoid to use for a long period the pump with water only
