Command Descriptions
TDS Family Oscilloscope Programmer Manual 2–147
"

!
 !

 ! terminates the hardcopy output in process.
NOTE. DCL does NOT clear the output queue once a hardcopy is in process. The
only way to abort the hardcopy process is to send the HARDCopy ABOrt
command. The output queue can then be cleared using DCL.
 clears the printer output spooler.
! initiates a screen copy that is sent to the controller where it can be stored
in a file or redirected to a printing device.
NOTE. Use the *WAI command between HARDCopy STARt commands to ensure
that the first hardcopy is complete before starting another.
 
stops any hardcopy output that is in process.
HARDCopy:FILEName
File System Only
Selects the file to send the hardcopy data to on the next hardcopy command
( ). This is equivalent to setting the target file name in the
Hardcopy menu.
Hardcopy
HARDCopy
"  !
"
Arguments
Examples
Group
Related Commands
Syntax