Command Descriptions
TDS Family Oscilloscope Programmer Manual 2–347

might return , indicating that there are 8 bits per waveform point.
WFMPre:BN_Fmt
Sets or queries the format of binary data for the first ordered waveform as
specified by the DATa:SOUrce command.
Waveform
DATa:ENCdg, WFMPre:BYT_Or, WFMPre:ENCdg
     






 specifies signed integer data-point representation.
 specifies positive integer data-point representation.
 
specifies that the binary waveform data are positive integer data-points.

returns either  or  as the current waveform data format.
WFMPre:BYT_Nr
Sets or queries the binary field data width for the first ordered waveform as
specified by the DATa:SOUrce command. This command is equivalent to the
DATa:WIDth command.
Waveform
DATa:WIDth, WFMPre:BIT_Nr
Examples
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands