Command Descriptions
2–260 TDS Family Oscilloscope Programmer Manual
SELect? (Query Only)
Returns the selected waveform and the display status of all waveforms.
Vertical
SELect?
SELect ?
SELECT?
might return :SELECT:CH1 1;CH2 0;CH3 0;CH4 0;MATH1 0;
MATH2 0;MATH3 0;REF1 0;REF2 0;REF3 0;REF4 0;SELECT CH1
SELect:<wfm>
Controls the display and selection of waveforms. There can be up to eleven
waveforms displayed at one time, but only one waveform can be selected at a
time. The selected waveform is the waveform that was most recently turned on.
This command is equivalent to pressing a front-panel CH or MORE button.
<wfm> can be CH<x>, MATH<x>, or REF<x> except in extended-acquisition-
length and InstaVu modes where MATH<x> is not used.
Vertical
SELect:<wfm> { OFF | ON | <NR1> }
SELect:<wfm>?
:
SELect
<Space>
OFF
?
ON
<NR1>
<wfm>
OFF or <NR1> = 0 turns off the display of the specified waveform.
ON or <NR1> 0 turns on the display of the specified waveform. The waveform
also becomes the selected waveform.
Group
Syntax
Examples
Group
Syntax
Arguments