Command Descriptions
2–268 TDS Family Oscilloscope Programmer Manual
"#  $  (TDS 400A, 510A) %  % 
(TDS 400A, 510A) %  (TDS 400A, 510A) % "" (TDS 500C,
600B & 700C only) % " &
"# 
 " #
!
"




""
 selects AC trigger coupling (TDS 400A, 510A).
 selects DC trigger coupling.
 coupling removes the high frequency components of the DC signal
(TDS 400A, 510A).
 coupling removes the low frequency components of the AC signal
(TDS 400A, 510A).
"" coupling sets the delayed trigger coupling to match the setting on
the main trigger (TDS 500C, 600B & 700C only).
" selects DC low sensitivity.
 
sets the delay trigger to DC coupling.

might return  for the delayed trigger coupling.
TRIGger:DELay:EDGE:SLOpe
Selects either a rising or falling edge for the delayed trigger. This command is
equivalent to selecting Slope in the Delayed Trig menu.
Trigger
Syntax
Arguments
Examples
Group