Command Descriptions
TDS Family Oscilloscope Programmer Manual 2–225
 



 
 

  

  is an input channel.
  is a math waveform.
  is a reference waveform.
 is a histogram (TDS 500C and 700C only).
  
sets channel 1 as the delay “to” source when making delay measurements.

might return .
MEASUrement:MEAS<x>:STATE
Controls the measurement system. The source specified by MEASUre-
ment:MEAS<x>:SOURCE1 must be selected for the measurement to be
displayed. The source can be selected using the SELect:CH<x> command.
Measurement
  !  "  "  #
 



 
 


Arguments
Examples
Group
Syntax