Command Descriptions
TDS Family Oscilloscope Programmer Manual 2–183

 


 

 is a reference waveform.
 specifies that no template testing is to be done for the specified channel.
 is a math waveform.
 
specifies REF1 as the template waveform against which to compare waveforms
acquired using MATH1.

might return  , indicating that waveforms acquired
using MATH2 will be compared to the template waveform stored in REF4.
LIMit:HARDCopy
Executes a hardcopy operation on the waveform when any waveform data
exceeds the limits set in the limit test, if the limit state is on. The hardcopy
operation uses the port, and prints in the format and layout, specified using the
HARDCopy commands.
Limit Test
LIMit:COMPARE:CH<x>, LIMit:STATE, HARDCopy
 !  "  "  #
 






Arguments
Examples
Group
Related Commands
Syntax