Telex BTR-800 dimensions TR-825 Menu Structure Receive 2 Screen

TR-825 Menu Structure

Receive 2 Screen Receive 2 Screen

The Receive 2 screen allows the user to set the beltpack re- ceive 2 frequency. This corresponds to the base station’s trans- mit 2 frequency. In factory-defined groups receiver 2 is not changeable. User-programable groups will allow the user to change the frequency in 25kHz steps.

•Press [MENU] three times from the group/channel screen to arrive at the receive 2 frequency screen.

•(User-Programmable Groups Only) Press [SET] to edit the frequency. The number will start flashing. Fac-

tory-defined groups can’t be changed, so pressing set will do nothing at this screen. User-programmed groups will start flashing and allow the user to change the frequency in 25kHz steps.

•(User- Programmable Groups Only) Use the [UP]/[DOWN] arrow buttons to change the frequency.

•(User-Programmable Groups Only) Press [SET] to place the beltpack on the frequency selected. If set is held

down, during that time the group is displayed so the user is aware of what group the unit has been placed. Once set is released, the unit returns to the receive 2 frequency screen with nothing flashing.

•(User-Programmable Groups Only) Pressing [SET] once more will start the editing sequence over again. Pressing

[MENU] during receive 2 frequency edit will end editing and send the user back to the receive 2 screen without any changes.

R2

565.350

[SET]

R2

65.350

[UP] / [DOWN]

R2

567.850

[SET] IS HELD DOWN

27u

GP

[SET] IS RELEASED

R2

567.850

END

7-27