Telex BTR-800, TR-825 dimensions TR-800 Menu Structure Transmit Screen

TR-800 Menu Structure

Transmit Screen Transmit Screen

The Transmit screen allows the user to set the beltpack trans- mit frequency. Factory-defined groups will allow only a set number of pre -defined frequen cies to be se lected . User-programmable groups will allow the user to change the frequency in 25kHz steps.

•Press [MENU] once from the group/channel screen to ar- rive at the transmit frequency screen.

TX

704.700

[SET]

• Press [SET] to edit the frequency. The number will start	TX
flashing.	704.700

[UP]/[DOWN]

•Use the [UP]/[DOWN] arrow buttons to change the fre- quency.

•Press [SET] to place the beltpack on the frequency se- lected. If set is held down, during that time the

group/channel is displayed so the user is aware of what transmit channel the unit has been placed. Once set is re- leased, the unit returns to the transmit frequency screen with nothing flashing.

•Pressing [SET] once more will start the editing sequence over again. Pressing [MENU] during transmit frequency

edit will end editing and send the user back to the transmit screen without any changes.

TX

706.500

[SET] IS HELD DOWN

03A 03

GP CH

[SET] IS RELEASED

TX

706.500

END

7-15