Telex TR-825, BTR-800 dimensions Frequency Edit, User-Programmed Groups Only

Models: TR-800 BTR-800 TR-825

1 86
Download 86 pages 29.4 Kb
Page 43
Image 43

Frequency Edit

(User-Programmed Groups Only)

This menu only occurs for user-programmable groups or when copying to a user-programable group. The Frequency Edit screen allows the user to set the group transmit frequencies and receive channel frequencies of a user-programmable group.

Press [MENU] three times to go to the frequency select screen from the operating screen. Press [SET] to start the

group number flashing. This screen allows the user to set the group and frequencies of user-programmed groups only.

Press the [UP] / [DOWN] arrows to change the group number. The frequencies listed will reflect what is cur-

rently in that group. Dashes will be displayed in any slots that are not defined yet. Pressing [SET] will select the group and start the selecting of frequencies within that group. The T1 frequency will start flashing.

Pressing the [UP] / [DOWN] arrows will change the fre- quency of “T1” in 25kHz steps. Pressing [SET] will ac-

cept the change and start you editing T2. If you had not hit the arrow keys when the frequency was flashing, but instead press [SET], you would have skipped to the next frequency to edit.

After editing the transmit and the receive channel fre- quencies, pressing [SET] will save that last frequency and

send you over to the beginning of the group/frequency select screen with nothing flashing. NOTE: Once the end of the displayed channel list is reached, the last displayed channel location will scroll to allow the user to edit the re- maining channels.

After action has occurred in the frequency edit screen hit- ting [MENU] will take you one menu back to the

group/frequency select screen so that the user may see what frequencies the base receivers are now on. If no ac- tion had occurred, then pressing [MENU] will take you to the operating screen. NOTE: Besides a group change, any editing that occurs within this screen to frequencies DOES NOT take effect until the user exits the screen via setting the last channel or pressing [MENU].

Frequency Edit

(User-Programmed Groups Only)

Group 25u 705.150

Freq di 707.850

554.250 710.100 565.350 715.300

[UP] / [DOWN]

[SET]

Group 27u 705.150

Freq Edit 707.850

554.250 710.100

567.800 715.300

[UP] / [DOWN]

[SET]

Group 27u 705.150 Freq Edit 707.850 556.725 710.100 567.800 715.300

[UP] / [DOWN]

[SET]

Group 27u 718.550

Freq Edit 720.550

556.700 721.350

569.350 721.900

[SET] or [MENU]

(Last Ch Changed)

Group 27u 705.950

710.550

556.700 714.225 569.350 716.800

END

7-8

Page 43
Image 43
Telex TR-825, BTR-800 dimensions Frequency Edit, User-Programmed Groups Only