Telex BTR-800 TR-825 Menu Structure Special Key Sequences Lockout, 1st Use Default

TR-825 Menu Structure

Special Key Sequences

Lockout

•Press [UP]+[DOWN] for 3 seconds to lock or unlock the beltpack. The words “Loc on” will be displayed when the

feature is activated, “Loc oFF” will be displayed when the beltpack is unlocked. Pressing [MENU] will still function to view screens, but [SET] will no longer start any edit- ing. ClearScan™, First use, Factory default, and Feature enable/disable are no longer accessible. The words “Loc out” will be flashed on the screen if any editing is at- tempted during lockout.

1st Use Default

•Press [MENU] while turning on the beltpack to enter the 1st use default setup screen. This places the unit on group

01A with channel 01 flashing. Any user-programmed frequencies that had been entered previously are re- tained. The beltpacks must now be set to different trans- mit channels using the [UP]/[DOWN] buttons. Then [SET] is hit to place the units on those channels. If lock- out had been activated, the beltpack comes up where it was last left regardless of [MENU] being pressed on power-up.

Factory Default

•Pressing all four buttons [MENU]+[SET]+[UP]+[DOWN] at the same time places the unit on group 01A with chan- nel 01 flashing, just like beltpack 1st use default, except

the all user-programmed frequencies that had been en- tered previously are erased. The beltpacks must now be set to different transmit channels using the [UP]/[DOWN] buttons. Then [SET] is pressed to place the units on those channels. If lockout had been activated, the beltpack comes up where it was last left regardless of these four keys being pressed.

7-34