Telex TR-825, BTR-800 dimensions TR-800 Menu Structure Receive 1 Screen

TR-800 Menu Structure

Receive 1 Screen Receive 1 Screen

The Receive 1 screen allows the user to set the beltpack re- ceive 1 frequency. This corresponds to the base station’s trans- mit 1 frequency. In factory-defined groups receive 1 is not changeable. User-programable groups will allow the user to change the frequency in 25 KHz steps.

•Press [MENU] twice from the group/channel screen to ar- rive at the receive 1 frequency screen.

R1

554.250

[SET]

•(User-Programmable Groups Only) Press [SET] to edit the frequency. The number will start flashing. Fac-

tory-defined groups can’t be changed; so pressing set will do nothing at this screen. User-programmed groups will start flashing and allow the user to change the frequency in 25kHz steps.

•( U s e r- P r o g r a mma b l e G r o u p s O n l y) U s e th e [UP]/[DOWN] arrow buttons to change the frequency.

•(User-Programmable Groups Only) Press [SET] to place the beltpack on the frequency selected. If set is held

down, during that time the group is displayed so the user is aware of what group the unit has been placed. Once set is released, the unit returns to the receive 1 frequency screen with nothing flashing.

•(User-Programmable Groups Only) Pressing [SET] once more will start the editing sequence over again. Pressing

[MENU] during receive 1 frequency edit will end editing and send the user back to the receive 1 screen without any changes.

R1

554.250

[UP] / [DOWN]

R1

566.750

[SET] IS HELD DOWN

27u

GP

[SET] IS RELEASED

R1

566.750

END

7-16