Group / Frequency Select

The Group/Frequency select screen allows a user to set the group and select from a pre-determined number of frequencies on each receiver. Each frequency displayed on the right half of the screen corresponds to a channel number in the Group/Channel Screen.

•Press [MENU] twice to go to the Group / Frequency Se- lect screen from the operating screen. Hit [SET] to start

the group number flashing.

•Press the [UP] / [DOWN] arrows to change the group number. The frequencies listed will reflect what is cur-

rently in that group. Hitting [SET] will select the group and start the selecting of predetermined frequencies within that group. The R1 frequency will start flashing. NOTE: The group number sets the transmit frequencies of factory defined groups and these are not editable. In user-programmed groups these are editable from the fre- quency edit screen.

•Pressing the [UP] / [DOWN] arrows will change the fre- quency of “R1” to the pre-defined frequencies available.

Hitting [SET] will accept the change and start you editing the next channel. If you had not hit the arrow keys when the frequency was flashing, but instead hit [SET], you would have skipped to the next frequency to edit.

•After the last receive frequency is decided upon, hitting [SET] will save that last frequency and start you over at

the beginning of the group/frequency select screen with nothing flashing.

•Pressing [MENU] will take you to the operating screen if this is a factory-defined group. If within a user pro-

grammed group, you will be taken to the frequency edit screen. NOTE: Hitting [MENU] after activity has oc- curred within the screen will return to the group/fre- quency edit screen with nothing flashing. Any change that had been done before the last [SET] was pressed will be aborted.