Telex TR-825, BTR-800 dimensions TR-800 Menu Structure Group / Channel Screen

TR-800 Menu Structure

Group / Channel Screen Group / Channel Screen

The Group/Channel screen allows the user to change the group and select from a pre-determined number of transmit channels.

•The screen displayed after the beltpack power-up screens.

•Press [SET] to edit the channel number. The channel number will start flashing.

•Use the [UP]/[DOWN] arrow buttons to change the chan- nel number.

•Press [SET] to place the beltpack on the channel selected. Once set is pressed, the beltpack transmitter will move to

that frequency and nothing will be flashing. Now press [SET] twice to enter group edit.

•Use the [UP]/[DOWN] arrow buttons to change the group number.

•Press [SET] to place the beltpack on the group selected. Once set is pressed, the unit returns to the group/channel

display with nothing flashing.

03A 01

GP CH

[SET]

03A 01

GP CH

[UP]/[DOWN]

03A 02

GP CH

[SET]

then [SET] twice more

03A 02

GPCH

[UP]/[DOWN]

05b 02

GPCH

[SET]

•	Pressing [SET] once more will start the editing sequence		05b	02
	over again. Pressing [MENU] during the group edit will		GP	CH
	end editing and send the user back at the group/channel
	screen without any changes. This applies to channel edit-	END
	ing too.

7-14