Thecus Technology Thecus N199 user manual System Management, System Notifications, System Logs

System Management

The System menu gives you a wealth of settings that you can use to configure your N199’s system administration functions. You can set up system notifications, view system logs, and even upgrade firmware from this menu.

System Notifications

From the System menu, choose the Notification item, and the Notification Configuration screen appears. This screen lets you have the N199 notify you in case of any system malfunction. Press Apply to confirm all settings. See following table for a detailed description of each item.

Notification Configuration

Item	Description
Beep Notification	Enable or disable the system beeper that beeps when a problem
	occurs.
Email Notification	Enable or disable email notifications of system problems.
SMTP Server	Specifies the hostname/IP address of the SMTP server.
Port	Specifies the port to send outgoing notification emails.
Auth Type	Select the SMTP Server account authentication type.
Sender Address	Set the sender mail address.
Sender Password	Enter the password for the sender’s mail account.
Confirm Password	Confirm a new password.
Receivers’ E-mail	Add one or more recipient’s email addresses to receive email
Address	notifications.
Send Test Mail	Click to send out a test e-mail to make sure the settings are
	correct.

NOTE

System Logs

Consult with your mail server administrator for email server information.

From the System menu, choose the Logs item and the System Logs screen appears. This screen shows a history of system usage and important events such as disk status, network information, and system booting. See the following table for a detailed description of each item:

36