TOA Electronics VM-2120 instruction manual Zone Broadcast source Made a broadcast last

11.2. Broadcast Priority between Equipment with the Equal Priority Level

11.2.1. Priority mode between equipment with the equal priority level

The following 3 priority modes are made available, which can be set using the unit's internal SW2-No. 8 and SW3-No. 1 switches.

(1)Last-come-first-served priority (factory-preset mode)

The latest broadcast takes precedence, with the earlier broadcast interrupted.

Broadcast source 1 (Made a broadcast first.)

Broadcast source 2 (Made a broadcast last.)

Zone 1	: Broadcast possible
Zone 2	: Broadcast interrupted
Zone 3
Zone 4

(2)First-come-first-served priority

Current broadcast is given priority, and other broadcasts cannot be made.

Broadcast source 1	Zone 1	: Broadcast possible
(Made a broadcast first.)	Zone 2	: Broadcast impossible
	Zone 3
Broadcast source 2
(Made a broadcast last.)	Zone 4

(3)Unit number priority (numerical order)

Assign the unit number to the following broadcast sound sources so they can be broadcast in numerical order.

(A)Remote Microphone (No. 1 – 4) (B)EV-200 message (No. 1 – 5)

Figure below shows an example for the priority operation between Remote microphones No. 2 and No. 3.

Remote microphone		Zone 1	Remote microphone
No. 3 (Made a broadcast first.)		Zone 2	No. 2 (Made a broadcast first.)
		Zone 3
Remote microphone			Remote microphone
No. 2 (Made a broadcast last.)		Zone 4	No. 3 (Made a broadcast last.)
	: Broadcast possible		: Broadcast impossible or interrupted

Zone 1

Zone 2

Zone 3

Zone 4

28