TOA Electronics VM-2120 instruction manual Operating Keys, Recorded Message-to-Group assignment

24.1.3. Recorded Message-to-Group assignment

Activated messages (1 – 5) are broadcast to their respectively assigned groups 1 – 5. (See p. 58 "Recorded Message-to-Group Assignment Operation.")

Setting example ( mark indicates "Set" state.)

						Setting content
Recorded Message	Broadcast Group					ALL zones (Marking a check bypasses the
(Setting item)
	1	2	3	4	5	external attenuator on all-zone broadcast.)
Message 1
Message 2
Message 3
Message 4
Message 5

Messages are broadcast to the zones selected in the above Zone-to-Group assignment.

[Default setting]

Only "All zones" is assigned to each of Messages 1 – 5. (Example: Message 3 setting in the above table)

24.2. Operating Keys

ZONE 1 – 5 keys*2ALL indicator

ZONE 1 – 5 indicators*1 *2

Master VM amplifier

LINK connector (rear)

Reset key	ALL key
	POWER switch

ZONE 6 – 10 indicators

Sub-VM amplifier

LINK connector (rear)

ZONE 6 – 10 keys

*1 See p. 55 "Indicator status."

*2 Function as the indicators or keys for the setting items (Group 1 – 5, Message 1 – 5, etc.) as well according to the setting steps.

•Note that the Sub-unit's zone selector keys function as the ZONE 6 through ZONE 10 keys.

•The figure above shows a 10-zone broadcast system where master unit and sub-unit are linked together. A 5-zone broadcast system requires the master unit only.

52