TOA Electronics VM-2120 instruction manual CF Card security cover

Step 4. Using 2 screws supplied with the EV-200, mount the EV-200 in the amplifier.

EV-200 connection cable

CN8

EV-200 Board

M3 x 6 machine screw 2 pieces (supplied with the EV-200)

Step 5. Check the DIP switch on the EV-200 Board again for correct setting. (See Step 1.)

Step 6. Using the 4 rear panel screws and 6 side panel screws removed in Step 2, replace the amplifier cover.

CF Card security cover

Remove 2 screws to detach the security cover when inserting the CF Card into the card slot. Be sure to replace the cover after inserting the card.

EV-200 Board

CF Card

CF Card security cover

M3 x 6 machine screw (2 pieces)

37