Using optical media drives

Disconnecting 3 1/2" diskette drive

When you have finished using the diskette drive, follow the procedures below to disconnect it:

1.Wait for the indicator light to go out to make sure all diskette activity has stopped.

CAUTION: If you disconnect the diskette drive or turn off the power while the computer is accessing the drive you may lose data or damage the diskette or the drive.

2.Click the Safety Remove Hardware icon on the Task Bar.

3.Click Diskette drive.

4.Pull the diskette drive connector out of the USB port.

Using optical media drives

The full-size drive provides high-performance execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") CD/DVDs or 8 cm (3.15") CD without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows.

NOTE: Use the WinDVD 4 application to view DVD-Video discs.

If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs section for precautions on writing to CDs.

PERATINGO

BASICS

4-3

Page 85
Image 85
Toshiba A10 Series user manual Using optical media drives, Disconnecting 3 1/2 diskette drive, Click Diskette drive