![](/images/new-backgrounds/1149767/14976743x1.webp)
SETTING THE LENGTH OF ALARM BEEPS
You can select the length in seconds of the alarm beeps (emitted at the end of transmission and reception) following the procedure below.
1 Press the [MENU] key. | 6 Press the [MENU] key. |
Press the [MENU] key to exit.
2 Press the [] key (
) or [
] key (
) until "4:USER PROGRAM" appears, and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3 Press the [] key (
) or [
] key (
) until "17:BEEP LENGTH" appears, and then press the [ENTER] key.
Selection
"17:BEEP LENGTH"
4 Press the [] key (
) or [
] key (
) to set the alarm beeps to the desired length or to turn them off.
The selections are as follows:
1:3SEC
2:1SEC 3:NO BEEP
5 Press the [ENTER] key.
18