![](/images/new-backgrounds/1149767/14976751x1.webp)
INITIAL SETTINGS
8 Press the [ENTER] key. | 9 Press the [MENU] key. |
Press the [MENU] key to exit.
SETTING THE DATE AND TIME
The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key ( ) and
The time can be displayed in
Use the following procedure to set the date and time:
1 Press the [MENU] key.
2 Press the [] key (
) or [
] key (
) until "2:ENTRY MODE" appears, and then press the [ENTER] key.
Selection
"2:ENTRY MODE"
3 Press the [] key (
) or [
] key (
) until "2:DATE&TIME SET" appears, and then press the [ENTER] key.
Selection
"2:DATE&TIME SET"
5 Enter the time (hour (two digits) and minute (two digits)) with the numeric keys.
Enter the hour in the following range: When
6 Press the [
] key (
) or [
] key (
) to select "AM" or "PM".
When
7 Press the [ENTER] key.
4 Enter the year (four digits), month (two digits), and day (two digits) with the numeric keys and then press the [ENTER] key.
ENTER DATE (2008-) 2008/01/02
Year Month Day
The year can be entered from 2008.
8 Press the [MENU] key.
Press the [MENU] key to exit.
22