![](/images/new-backgrounds/1149767/149767145x1.webp)
SPECIAL FUNCTIONS
Follow these steps to use the fax transfer function:
1 Press the [MENU] key.
2 Press the [] key (
) or [
] key (
) until "0:RX DATA TRANSFER" appears, and then press the [ENTER] key.
Selection
"0:RX DATA TRANSFER"
3 Press the [] key (
) or [
] key (
) until "1:DATA TRANSFER" appears, and then press the [ENTER] key.
Selection
"1:DATA TRANSFER"
5
4 Press the [] key (
) or [
] key (
) until "1:YES" appears, and then press the [ENTER] key.
Selection
"1:YES"
The received fax is transferred.
To cancel the transfer, select "2:NO" and press the [ENTER] key.
If "NOT STORED FW.#" appears:
The transfer destination number has not been programmed. Program the number and then transfer the fax.
If you set the data transfer mode, when data Note cannot be transferred because the other fax
machine was busy, or when the error condition on your fax machine is corrected, the data does not print out. To print the data, turn off the power to the fax machine, then turn it on again.
69