SPECIAL FUNCTIONS
Adding a original to polling memory:
Use this procedure to add an original to another original that has already been scanned into polling memory. Place the original in the RADF or on the document glass and follow the steps below.
1 Press the [MENU] key.
2 Press the [
] key (
) or [
] key (
) until "7:MEMORY POLL MODE" appears, and then press the [ENTER] key.
Selection
"7:MEMORY POLL MODE"
3 Press the [
] key (
) or [
] key (
) until "1:SET" appears, and then press the [ENTER] key.
Selection
"1:SET"
4 Press the [
] key (
) or [
] key (
) to select the number of times polling transmission will take place and press the [ENTER] key.
"1:1 TIME" or "2:REPEAT" can be selected as the number of polling operations allowed.
5 Press the [START] key ( 
).
Deleting originals from polling memory:
Follow the steps below to delete originals that have been scanned into polling memory.
1 Press the [MENU] key.
2 Press the [
] key (
) or [
] key (
) until "7:MEMORY POLL MODE" appears, and then press the [ENTER] key.
Selection
"7:MEMORY POLL MODE"
3 Press the [
] key (
) or [
] key (
) until "2:CLEAR" appears, and then press the [ENTER] key.
Selection
"2:CLEAR"
4 Press the [START] key ..
76
