![](/images/new-backgrounds/1149767/149767111x1.webp)
4
Chapter 4
HOW TO USE THE FAX FUNCTION
The machine offers a range of sophisticated features that allow you to control image quality, reception mode, broadcasting, polling, and transmission priorities. Functions such as sending original(s) from memory and substituting reception into memory are possible, due to the large memory capacity.
SENDING ORIGINALS
SETTING THE ORIGINAL
This section describes setting original(s) in the RADF or on the document glass.
When Using the RADF:
1 Confirm that there are no original(s) on the document glass and that copying is not in progress, then gently close the RADF.
2 Adjust the original guides to the width of your original(s).
4 There are two ways to send the fax:
•To scan the original into memory, then dial and transmit, continue with the "DIALING AND TRANSMITTING" section. (p.59)
•To dial and transmit the original directly without first scanning it into memory, press the [MEMORY] key to make the [MEMORY] key indicator go off. Continue with the "DIALING AND TRANSMITTING" section. (p.59)
3 Place the original(s) face up and push it gently into the document feeder tray. The top edge of the original(s) should enter the fax first.
Original face up
52