Toshiba GSC-R30 owner manual Spe c ifying Indivi dual Dpof Settings

Writing Print Information (DPOF Settings)

Use this procedure to specify the settings for date display and the number of prints of

images you want to print in DPOF-format (see “Glossary” p.197).

POINT

•DPOF settings allow you print images simply by taking an SD card to a retail store.

•You can also print your images at home on a DPOF-compatible printer.

ATTENTION

•DPOF settings can only be specified for still images on an SD card. Copy the

images from the hard disk drive to an SD card beforehand.

See “Copying Images” p.115.

Specifying Individual DPOF Settings

1From the play menu, use the jog dial to select [DPOF] and press the OK button.

PLAY MENU

COPY

MOVE

DPOF

PictBridge

VIDEO EDITING

EXIT

If the hard disk drive is set as the playback drive, a message appears saying [ONLY STILL IMAGES ON SD CARDS ARE DPOF TARGET IMAGES.].

Use the jog dial to select [TO SD] and press the OK button.

2

Use the jog dial to select [SET] and press the OK button.

DPOF

SET OR CLEAR

THE DPOF SETTINGS.

SET CLEAR ALL

3Use the jog dial to select the image for which DPOF settings are to be set and move the OK button to or to set the number of prints.

DPOF100-0021

00 00 NEXT ALBUM

SELECT ALL TOTAL 0000

OK CANCEL

OK

To move to the previous or next album, move the OK

button to or respectively.

You can specify up to 99 prints per image.