Toshiba GSC-R30 owner manual Creating Image Lists for Recording to DVD

Creating Image Lists for Recording to DVD

This function allows you to pre-select some of the images saved on the hard disk drive for recording onto a DVD.

Using a PC and the bundled application software, you can quickly and easily burn a DVD with the created list of images.

See “Using a DVD Creation List to Create DVDs” p.164. You can also use Auto play to check created image lists.

See “Setting up and Running Auto Play” p.110.

ATTENTION

• Only images saved on the hard disk drive can be specified in a DVD creation list.

1 From the play menu, use the jog dial to select [DVD CREATION LIST] and press the OK button.

PLAY MENU

PictBridge

VIDEO EDITING

DVD CREATION LIST

LCD BRIGHTNESS

SETUP

EXIT

If the SD card is selected as the playback drive, the

[ONLY IMAGES ON HARD DISK DRIVE ARE DVD CREATION LIST TARGET IMAGES.] message is displayed.

Use the jog dial to select [TO HDD] and press the OK button.

2Use the jog dial to select [YES] or [NO] and press the OK button.

DVD CREATION LIST

LOAD THE EXISTING DATA?

YESNO

When [YES] is selected, the existing data is loaded. Selecting [NO] clears the existing data and replaces it with the new data.

If there is no existing data, this screen is not displayed.

3Use the jog dial to select [DISC CAPACITY] and press the OK button.

DVD CREATION LIST

CONNECTION DEVICES PC DISC CAPACITY 4.7GB

The 3 available disc capacities are 1.4GB, 4.7GB and 8.5GB.

OK CANCEL

4

5

Use the jog dial to select the DVD capacity and press the OK button.

Use the jog dial to select [OK] and press the OK button.