Supported PCs, Ram | Toshiba GSC-R30 specification

Supported PCs

Connecting the camera to a PC enables you to transfer your photographed images to the PC, edit the images, send them to your family and friends via the Internet, or burn them onto a DVD.

SystemRequirements for Connected PCs

PCs connected to the camera must conform to the system requirements shown below. Check your system before connecting the camera.

Software system requirements

	OS*1	Windows® 2000 Professional, Windows XP Home Edition or
		Windows XP Professional


	CPU	700MHz Pentium® III or better (2GHz Pentium 4 or better
		recommended)


	RAM	128MB or better (256MB or better recommended)

	Hard disk drive	ACDSee 7 for Toshiba : Min. 100MB (for installation)
		PowerProducer 3 for Toshiba : Min. 550MB (for installation)
	capacity
		Minimum 5GB required for DVD writing


	Display	Display adapter with 1024 ✕ 768 or better and 16-bit High Color or
		better (True Color recommended)


	Interfaces	USB 1.1*2 or USB 2.0 installed in the PC (USB 2.0 recommended)
		Depending on the drive used for authoring:
		DVD-Video: DVD-R/-RW, DVD+R/+RW/+R DL
	Supported media	DVD-VR	: DVD-RW, DVD-RAM
		DVD+VR	: DVD+R/+RW
		Data	: DVD-R/-RW, DVD+R/+RW/+R DL, DVD-RAM, CD-R*3
		For information on recommended drives, refer to the PowerProducer
	Supported drives	3 “Readme” file.
		For the latest drive information, contact a Toshiba Customer Service
		Department or Toshiba Customer Support Department.

	Other	Microsoft Internet Explorer 5.5 or later*4, Microsoft Direct-X 9 or later

*1: In each case, only PCs with pre-installed operating systems are supported. Operation is not guaranteed on upgraded PCs. Macintosh computers are not supported.

Note also that operation is not guaranteed on all PCs.

*2: Data cannot be written from a PC to the camera when a USB 1.1 connection is used.

*3: Video CDs and SVCDs cannot be created.

*4: If Microsoft Internet Explorer 5.5 or later is not installed, installation of the bundled software will not be completed. Before installing the bundled software, install Microsoft Internet Explorer 5.5 or later.

For information on installing Microsoft Internet Explorer, visit the Microsoft website.

Image 157

Toshiba GSC-R30 Supported PCs, Sy s t em Requirements for Connected PCs, Dvd-Vr Dvd-Rw, Dvd-Ram Dvd+Vr Dvd+R/+Rw

Contents

GSC-R60/GSC-R30 Page Toshiba America Consumer Products, L.L.C Preface Tradema rk Information Before Using Your CameraCopyright /Image Rights This hard disk camera supports Exif Print CD-ROM Accessories Graphic symbol definitions Safety Precautions When using the product Do not swing the camera while walking About the AC adapter About the battery Use only the specified battery GSC-BT5 Contents Advanced Deletion Avoid S ubjec ting t he Camera to Vibrations or Impacts Handling Your Camera and CradlePa y a tt entio n to Condensation Be C arefu l o f Magnetic Fields Whe n Cleaning the CameraBe C arefu l o f Ele ctromagnetic Waves Sp ec ifications Handling the AC Adapter About Battery Use Handling the BatteryWhe n not Using the Battery for a Long Time Char ging the Bat tery Getti ng the Most Out of Your BatterySp ec ificat ions Us ing the Hard Disk Drive About the Built-in Hard Disk Drive About SD Memory Cards Preparation Ca mera Component Names Camera LEDs Using the OK Button Cradle LEDs Cr ad le* o nly with GSC-R60Cradle Operation Mode Play Mode RECRe mo te Con trol REC Inser ting the Battery Inserting and Removing the BatteryOpen the battery cover Close the battery cover Re mo ving the Battery Char ging with the Camera in the Cradle ChargingConnect the components in the sequence to above Char ging in the Camera Battery Level Display Ca mera O pe ratio n Time Using the Battery Inser ting an SD Card Inserting and Removing SD CardsRe mo ving an SD Card Turning the Camera On and Off Turning the Ca mera On and Off by Sliding the Power Switch Setting the Date and Time Use the jog dial to select an album type Creating AlbumsPress the OK button Album Types Albums and Drives Drive SD card Album Using the LCD Monitor Lo a d ing the Battery About the Remote ControlEffect ive Range Videos Quick Reference Guide To print still images To save images onto Shooting Video Holding the Cam era Before You ShootAdjus ting th e Grip Belt LCD Display W hen in Recording Mode Information Display LCD Display When in Recording Mode Normal Display Shooting Video Pausing Video RecordingPress the REC button Memo Button Operations during Video Recording LCD Monitor Display during Video RecordingREC Pause OFF REC Pause on Taking Still Images Fo c u sing When the Camera Will not Focus Zoom Bar Display Shooting with the Zoom Memo Playi ng back Still Images PlaybackLCD Monitor Display during Still Image Playback Use the jog dial to select the video you want to play Play i ng Back Vid eoMove the OK button to One-touch Skip/Replay Button Operations during Video PlaybackWhile a video is playing or paused, move the OK button to Reservation LCD Monitor Display during Video Playback Select Erase ONE Image and press the OK button Erasing Images Erase one Image Advanced Photography Set the camera to recording mode and move the OK button to Setting the SceneFlash Restrictions Imposed by Scene Settings Memo Suggested Situations for the Flash Settings Setting the Flash Memo Shooting Range Imposed by Focus Settings Setting the Focus Anual Focus Focus settings p.62, selectUse the jog dial to focus the shot Subjects for Which Exposure Bias Works Using Exposure Bias Set the camera to recording mode and press the button Using the Backlight Compensation Function Photography Using the Assist Light Duringfully. video recording, press the REC button down Shooting Still Images during Video Recording Using the Conversion Lens or Lens Hood Recording mode, press the Menu button Changing the Recording Menu SettingsUse the jog dial to select a menu and press the OK button To return to shooting, press the Menu button Button Operations during Recording Menu Setting Recording Menu Cr eatin g Albums on the Hard Disk Drive Creating and Selecting AlbumsUse the jog dial to select HDD and press the OK button Ch anging t he Type of an Album on the Hard Disk Drive Use the jog dial to select YES or no and press the OK button Shooting with the Self-timer Continuous Recording Continuous Recording Memo Approximate Video Recording Times Setting the Video QualityHqwide Spwide Memo Approximate Number of Available Shots for Still Images Setting the Still Image Size Memo Cloud AutoFluorescent Light Incandescent Lamp Us ing P rese t Dat a Over wri ting Pres et Data Changing the Sensitivity Shooting with Image Stabilization Wind Noise Reduction More Changing the Microphone SensitivityLess Digital Zooming Center Weighted Selecting the Metering Mode Selecting the Focus Area AF Mode Standard Changing Image ColorsVivid Hard Changing the Image ContrastSoft Changing the Image Sharpness Previewing Images Pausing Video Recording Changing the LCD Brightness While recording video, press the Menu button Ch anging t he LCD Brightness during Video Recording Advanced Playback Displaying Images as a List Thumbnail Display Changing LevelsTo Move to Another Album Select thumbnail display Slide the zoom lever towards W Se lecting Albums and Drives for PlaybackAlbum display, slide the zoom lever towards W Continuous Play Selecting the Video Playback MethodFile Press the REC button down fully Capturing Single Video Frames as Still Images Use the jog dial to select a chapter and press the OK button Slide the zoom lever towards T Zo omed Still Ima ge Playback Using Zoomed Playback Zo omed Video Playback Viewing Rotated Still Images Selectimage.playback mode and use the jog dial to select Switching the Playback Display Specify the desired options in the settings screen Changing Playback SettingsPlayback mode, press the Menu button To exit the play menu, press the Menu button Play Menu Button Operations during Play Menu Setting Se ttin g up a uto Play Setting up and Running Auto PlayPlay Interval Animation Use the jog dial to select Execute and press the OK button Runnin g Auto Play Selecting an d Protecting Images Protecting ImagesMove the OK button to to select OK and press the OK button Confirming Images in Enlarged View To Protect all the Albums Protecti ng Albums To Unprotect all the Images in an Album Re mo ving Protection Use the jog dial to select Next and press the OK button Copying Images Copying all Images in an Album Moving Images Moving all Images in an Album Use the jog dial to select SET and press the OK button Spe c ifying Indivi dual Dpof Settings Printing all Images in an Album Use the jog dial to select Clear ALL and press the OK button Clea ring Dpof S ettings Printing Directly from the Camera Using PictBridge Layout Paper SizePaper Type Print Date Editing Videos When you have identified the point, press the OK buttonMove the OK button to to play the video Deleting the Previous Part Button Operations during Video EditingDeleting the Remainder Specify Thumbnail Images Thumbnail Screen Creating Image Lists for Recording to DVD Recording all Images in an Album Advanced Deletion Erasing Selected Images Erasing all Images in an Album To Erase all the Albums on a Drive Erasing all the Files on a Drive Basic Camera Settings Changing the Basic Camera Settings Setup Menu Button Operations during Setup Menu Setting Sound Press the Menu button to return to the setup menu AF Assist Light Setting the LEDsRecording LED Auto Power Off LCD-linked Power Video Output Language Us ing the Hard Disk Drive Protection Function System Re se tting the System Use the jog dial to select Reset and press the OK button Use the jog dial to select Format and press the OK button Fo rmatting Drive s Displaying the Version Information Connecting to Other Devices Connecting to a TV Connecting to a TV for Playback Connecting to a PC Press the USB button on the cradle HIG H S Peed MO DE and Full Speed Mode Disc onnecting the Camera from the PC Connecting to a DVD Recorder with DVR Press the LAN button on the cradle Working with Images on Your P About the Bundled Software About the Software Sy s t em Requirements for Connected PCs Supported PCsRAM DVD-VR DVD-RW, DVD-RAM DVD+VR DVD+R/+RW Fo ld er Confi gura tion for Image Backups About the Fi le Configuration Click the acdsee7 PowerProducer 3 icon Installing the SoftwareRestart your PC Click View data using ACDSee Select USB modeViewing Camera Images on a PC ACDSee Main Window Backing up Camera Data Click Backup data to CD/DVDComplete the disc label and then click the Next button Click the Next button Select the folder to be copied and click the Next button Click Backup data to PC using synchronization Us ing a DVD Cre ation List to Create DVDs Click Create a DVD-Video using DVD creation listClick the button Us ing the Import Wizard to Back Up Data to a PC Click Backup data using Acquire WizardSelect the images to be copied and click the Next button Set the options and click the Next button Printing with the Ca mera Connected Directly to the Printer Printing Still ImagesPrint ing Click Done Resizing Images Copying Still Images from a PC to the Camera Writing Print Information on a PC Insert a DVD into the drive on the PC and click the button Recording Images onto DVDs Memo Connecting to a DVD Recorder with DVR Su pported DVD Recorders with DVR PasswordCamera Name Group Name IP Config Manual IP Address When you have finished entering text, press the OK button OK Cancel Selectchange Transferring Videos to a DVD Recorder with DVR Transferring Videos to a DVD Recorder with DVR Use the jog dial to select Transfer and press the OK button Transferring all Images in an Album Appendix Specifications Recording format MPEG-2 PS Troubleshooting Edit one or more videos Slide the Power switch across AUTO, flash use is restricted RED-EYE Reduction Suppressed FlashSunset Flash Back still Was changed on a PC, etc Or file names Unprotect an Image SD card is locked Unlock the SD card You have already specified Maximum number of prints An album Images CD-ROM AC adapter is not Connect the AC adapter Error Messages No INK Paper ErrorNo Paper Storing Backlight compensation Glossary Jpeg Index Above Warranties are Subject to the Following Conditions How to Obtain Warranty Services Limited One 1 Year Warranty on Parts and Labour Page Arbitration and Dispute Resolution Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page