Toshiba GSC-R30 owner manual Paper Size, Layout, Paper Type, Print Date

6Use the jog dial to select a setting and press the OK button.

PictBridge

PAPER SIZE	PRINTER SETTINGS
LAYOUT	PRINTER SETTINGS
PAPER TYPE	PRINTER SETTINGS
PRINT DATE	PRINTER SETTINGS
PRINT	CANCEL
SELECT	CHANGE

PAPER SIZE

:Selects the paper size for printing.

LAYOUT

:Selects the printing layout.

PAPER TYPE

:Selects the type of paper used for printing.

PRINT DATE

:Chooses whether to print the photography date.

The options that can be set differ depending on the connected printer.

If you change the paper size, the options for layout and paper type are cleared.

7Use the jog dial to change the settings and press the OK button.

8Move the OK button to to select [PRINT] and press the OK button.

Printing begins.

When printing ends, the prints setting screen in step 2 reappears. If there is no further printing, press the MENU button.

When the [DISCONNECT USB CABLE.] message appears, disconnect the USB cable from the camera and printer.

Confirming Images in Enlarged View

In step 2, slide the zoom lever towards T.

Sliding towards W in enlarged view will return to the PictBridge settings screen.

Printing all Images in an Album

In step 2, after pressing the OK button before specifying the number of images, select [SELECT ALL] using the jog dial, then press the OK button.

Next, move the OK button to or to specify the number of images.

MEMO

•You can specify up to 99 prints.

•Note that some types of printer are not compatible with PictBridge.

•Use the AC adapter when connecting the camera to a printer.

•You cannot specify images on the hard disk drive and an SD card at the same time.