Toshiba GSC-R30 owner manual Printing Directly from the Camera Using PictBridge

A printer connection message is displayed.

Printing Directly from the Camera Using PictBridge

By using a PictBridge (see “Glossary” p.198) -compatible printer, you can print directly from the camera without using a PC.

ATTENTION

•You should connect the AC adapter when printing still images.

If the battery runs flat while images are being printed, printing stops and the camera automatically turns off. If this happens, connect the AC adapter or ensure that the battery is fully charged before printing the images again.

•The camera is not guaranteed to connect successfully to all PictBridge- compatible printers.

•If you disconnect the USB cable while the camera is connected to a printer, malfunctions may occur.

1 From the play menu, use the jog dial to select [PictBridge] and press the OK button.

PLAY MENU

MOVE

DPOF

PictBridge

VIDEO EDITING

DVD CREATION LIST

EXIT

2Use the jog dial to select the still image to be printed and then move the OK button to or to set the number of prints.

PictBridge100-0025

00 00 NEXT ALBUM

SELECT ALL TOTAL 00

OK CANCEL

OK

To move to the previous or next album, move the OK

button to or respectively. You can set up to 99 prints in all.

3When you have finished setting the number of prints, press the OK button.

4Use the jog dial to select [OK] and press the OK button.

5Connect the camera to the printer with the USB cable.

When the connection is completed, the print settings screen appears.