28

Inserting and Removing the Battery

Inserting the Battery

IMPORTANT
• If you load the battery when the camera has not been correctly shut down, the
camera may not operate correctly. In this event, turn the camera off and on again.
Check that the camera is turned off.
1Open the battery cover.
Slide the battery cover lock on the bottom of the camera
in the direction of the arrow and open the battery cover
in the direction of the arrow .
Battery lock lever
2Use the battery to push the battery lock lever in the
direction of the arrow as you slide the battery in .
Insert the battery as shown in the figure with the label
facing up. Insert the battery firmly as far as it will go, and
check that the battery is secured by the battery lock lever.
3Close the battery cover.
Slide the battery cover in the direction of the arrow to
close it.
Check that the battery cover is securely closed.