Copying Still Images from a PC to the Camera
Use this procedure to copy images saved on a PC to the camera’s hard disk drive.
IMPORTANT
•With a “FULL SPEED MODE” connection, this function cannot be used because the camera is protected. Check the connection settings and your PC.
Turn on the PC and the camera.
1Select USB mode.
The gigashot backup tool starts up.
See “Connecting to a PC” 
p.150.
2Click [View data using ACDSee].
3Select the images you want to copy to the camera and click [Copy to Camera] in the [Create] menu.
4Select the image conversion size and click [OK].
The images are copied to the camera’s hard disk drive and stored in the “XXXACDSE” folder under file names in the “ACDSXXXX.jpg” format.
Copies all the images at 640 ⋅ 480 pixels, regardless of the original image size.
Copies images as is without resizing.
The sizes of the resized images vary depending on the source image size. Images larger than 640 ✕ 480
Images are resized to 1024 ✕ 768. Where the original image is smaller than 1024 ✕ 768, a black border appears around the image.
Images smaller than 640 ✕ 480
Images are resized to 640 ✕ 480. Where the original image is smaller than 640 ✕ 480, a black border appears around the image.
MEMO
•If you select “Do not resize”, you may not be able to view some image sizes correctly on the camera.
•You may be unable to display copied images that were not shot on this camera.
