Char
ging
in
the Camera
Terminal cover
1Open the terminal cover on the camera.
2Connect the power cord and AC adapter and then plug the power cord into the mains power socket.
3Plug the DC plug on the AC adapter into the DC IN 10V socket on the camera.
When battery charging begins, the STATUS LED on the camera lights red. When charging is completed, the STATUS LED on the camera turns green.
IMPORTANT
•The battery is charged while in the camera. Never attempt to charge the battery with another charger.
•If a problem arises during charging, unplug the power cord from the mains power outlet, remove the battery from the camera and contact Toshiba Customer Service Department or Toshiba Customer Support Department. Be careful when removing the battery as it can become hot.
•If the camera is charged in conditions where it becomes hot (in direct sunlight, etc.), the heat in the camera may trigger a sensor in the camera that prevents charging from beginning immediately. If this occurs, allow the camera to cool fully before charging.
MEMO
•To get the best possible performance from your battery, charge it when the ambient temperature is between 50°F (10°C) and 86°F (30°C).
Battery Level Display
When you turn the camera on, the level of charge in the battery appears on the LCD monitor.
Display |
|
|
|
| |
|
|
|
|
| |
Meaning | Fully charged | Low charge | Almost out of | Running on the | |
charge | AC adapter | ||||
|
|
| |||
|
|
|
|
|
