Toshiba GSC-R30 owner manual Slide the Power switch across

Problem	Cause	Solution	Page
Operation
None of the	A system error has occurred.	Slide the POWER switch across
buttons work.		and hold it in place for at least 5
		seconds. Note that this may
		result in the loss of any files that
		are being created. Settings	34
		such as the date and time may
		also revert to their default
		values. In this event, reset the
		settings before using the
		camera again.
Operation is	Too many images are stored on	Erase some images.	130
slow.	the hard disk drive.	Edit some videos.	124
		Move some images to a	162
		different drive or onto a PC or
		DVD, etc.
The remote	The remote control battery is	Load the battery correctly.	39
control does	not loaded in the correct
not work.	direction.
	The battery in the remote	Fit a new battery.	39
	control is flat.
	You are outside the effective	Use the remote control at a
	range.	distance of up to around 4
		meters and at an angle of up to	39
		roughly 25° left or right of the
		camera.
	There is a strong light shining	Avoid shining strong light
	on the remote control sensor.	directly at the remote control	39
		sensor.