HW Setup
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:
U | Selects the USB floppy disk drive. |
|
|
N | Selects the Network. |
|
|
C | Selects optical device. |
To select the boot drive you want, follow the steps below.
1.
2.The boot select screen will be displayed: Hard Disk Drive, CD/DVD, FDD, and LAN.
3.Use the upper/lower cursor keys to highlight the boot device you want and press Enter.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode.
Enabled | Enables the |
|
|
Disabled | Disables the |
| (Default). |
|
|
USB
Legacy USB Support
Use this option to enable or disable legacy USB support. If your operating system does not support USB, you can still use a USB mouse, keyboard, and floppy diskette drive by setting the Legacy USB Support option to enable.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a wake- up signal from the LAN.
Enabled | Enables |
|
|
Disabled | Disables |
|
|
TOSHIBA M50 |