Toshiba M50 user manual Wireless LAN, Disable/Enable the Wake-up On LAN feature

Operating Basics

B. Disable/Enable the Wake-up On LAN feature

Once configured as described above, you can disable/enable this feature through the following steps:

1.Within Windows, click [Start]->[Control Panel]->[Toshiba HWSetup] and then select the [LAN] tab.

2.Select [Enabled] or [Disabled] as appropriate within the Wake-up on LAN section.

3.Click [Apply] and then click [Yes] to restart the system.

Wireless LAN

The wireless LAN is compatible with other LAN systems that comply with the IEEE 802.11a+g or 802.11g wireless LAN standards.

It supports the following:

■Automatic Transmit Rate Select mechanism in the transmit range of 54, 11, 5.5, 2 and 1 Mbit/s.

■Advanced Encryption Standard (AES) data encryption, based on 128bit encryption algorithm. (Revision G, A/G combo type.)

Wake-up on LAN does not function on a Wireless LAN.

■Frequency Channel Selection (5GHz and 2.4 GHz)

■Roaming over multiple channels

■Card Power Management

■Wired Equivalent Privacy (WEP) data encryption

TOSHIBA M50 4-8