Operating Basics
Important information for use
Note the following limitations when you write video DVD:
1. Editing digital video
■Log in with Administrator rights to use WinDVD Creator.
■Make sure that your computer is running on AC power when using WinDVD Creator.
■Operate the computer at Full Power. Do not use
■While you are editing DVD, you can display previews. However, if another application is running, the preview might not display properly.
■WinDVD Creator cannot show video on an external monitor if the computer is configured for simultaneous display mode.
■WinDVD Creator cannot edit or play copy protected content.
■Do not change display settings while using WinDVD Creator.
■Do not enter standby/hibernation mode while using WinDVD Creator.
■Do not operate WinDVD Creator immediately after turning on the computer, you should ensure you wait until all disc/disk drive activity has stopped.
■When recording to a
■CD recorder, JPEG functions,
■While recording video to DVD or tape, please close all other programs.
■Do not run software like a screen saver because it can put a heavy load on the CPU.
■Do not run communication applications like a modem or a LAN.
2. Before recording the video to DVD
■When you record to DVD media, please use only discs recommended by the drive manufacturer.
■Do not set the working drive to be a slow device like a USB 1.1 hard disk drive or it will fail to write the DVD.
■Do not perform any of the following actions:
-Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel.
-Bump or cause vibration to the computer.
-Use either the mode button or the audio/video control buttons to reproduce music or voice.
-Open the DVD drive.
-Install, remove or connect external devices such as PC card, USB devices, an external display, i.LINK. devices or optical digital devices.
TOSHIBA M50 |
