Toshiba M50 user manual Connecting, Disconnecting

Operating Basics

Connecting

To connect the internal modem cable, follow the steps below.

■In case of a lightning storm, unplug the modem cable from the telephone jack.

■Do not connect the modem to a digital telephone line. A digital line will damage the modem.

1.Plug one end of the modular cable into the modem jack.

2.Plug the other end of the modular cable into a telephone jack

Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

If you use a storage device such as an optical media drive or hard disk drive connected to a 16-bit PC Card, you may find that the modem speed is slow or the communication session might be interrupted.

If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility.

Disconnecting

To disconnect the internal modem cable, follow the steps below.

1.Pinch the lever on the connector in the telephone jack and pull out the connector.

2.Disconnect the cable from the computer in the same manner.

TOSHIBA M50 4-5