Toshiba M50 user manual Chip Set, Memory, Slot, L2 Cache

TOSHIBA M50 Features

Chip Set

Mobile Intel® 915PM/915GM/ 910GML Express Chipset

ATI MOBILITY™ RADEON® X600SE with HyperMemory™ (Built-in controller depends on the model you purchased)

ENE KB910 B4 for Keyboard Controller, Battery management Unit, and RTC

Marvell 88E8036 10/100 LAN controller

Marvell 88SA8040 for SATA to PATA bridge

LPC47N207 Super IO IC for FIR

ALC250_D for AC97 Codec.

TI PCI7411 for Maltiple Digital Media Card Slot, 1394 and PCMCIA controller.

TI PCI4510R for 1394 and PCMCIA controller

TI PCI1510R for PCMCIA controller

Memory

The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of system memory available for other computing activities. The amount of system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.

Slot	One memory expansion slot is located on the
	underside of the computer and one beneath the
	keyboard. Depending on the model, you can
	upgrade to a maximum of 2,048Mb memory using
	two 1,024Mb expansion modules, although you
	may need to remove an existing memory module
	from the computer in order to achieve this
	capacity. The memory on the underside of the
	computer is considered user-upgradable but the
	memory beneath the keyboard must be upgraded
	by an authorised TOSHIBA service partner.
	Maximum upgradable system memory depends
	on the model you purchased.
L2 Cache	Depending on the model you purchased:
	1MB L2 Cache (Intel® Celeron® M Processor)
	2MB L2 Cache (Intel® Pentium® M Processor)

TOSHIBA M50 1-2