Chapter 3 Hardware Installation

Follow the steps below to mount your camera.

1.Attach the camera with the included stand

2.Place the camera on the table or fix it onto ceiling or wall

Use three screws to fix the camera onto the ceiling or wall. You could also put the camera on the table directly.

Fix it by

Screws

3.Plug an Ethernet cable into the camera

Connect an Ethernet cable to the LAN port located on the cameras bottom and attach it to the network.

Ethernet

Cable

6

Page 14
Image 14
TP-Link TL-SC3230N, TL-SC323ON manual Hardware Installation, Plug an Ethernet cable into the camera