Turbo Chef Technologies 3240 Setup Mode, Accessing the Fault Count Screen, Edit Option Screen

1 6 OVEN MODES

Accessing the Fault Count Screen	3. To change the display language.
Refer to page 29 for fault descriptions.	4. To access the info screen.
From the CONFIG MODE (Figure 9, page 15),	To access the SETUP MODE, press the up key
	from the OVEN OFF or COOLING DOWN MODE
press R1 to access the fault count screen (Figure
	(to access the CONFIG MODE), and then press L1.
13). The oven will display the number of faults
that have occurred since the oven fault counts
were last cleared (page 20), the oven’s software	Changing the Display Temperature
was last updated (page 15), or the oven was last	The oven can display the temperature in either
returned to the manufacturer’s default settings
	Celsius or Fahrenheit units. To change the
(page 20).	display temperature, press L1 in SETUP MODE
	(Figure 14).

Accessing the Setup Mode

From the CONFIG MODE (Figure 9, page 15), press L1 to access the SETUP MODE. The SETUP MODE allows the user to customize several oven settings - see below for more details.

Accessing the Test Mode

From the CONFIG MODE (Figure 9, page 15), press R3 to access the TEST MODE. The TEST MODE gives the service agent the ability to diagnose oven problems and perform other serv- ice related tasks. See page 17 for more informa- tion on the TEST MODE.

Setup Mode

Figure 14

The SETUP MODE serves four main purposes:

1.To change the display temperature.

2.To access the edit option screen.

Edit Option Screen

The edit option screen (Figure 16) allows the user to switch between full edit, rigid, and flex options. For more information on the different edit options, see Editing a Cooking Profile on page 12.

To access the edit option screen,

1.Press L3 (Figure 14) to access the password screen (Figure 15).

2.Input the password 6 6 3 3 by pressing the soft key adjacent to the appropriate number.

To change the edit option (Figure 16), -Press L1 to select the full edit option. -Press L2 to select the rigid option. -Press L3 to select the flex option.

L1	FAULT	COUNTS	R1	L1	1		4	R1
	F1: 0	F6: 0				ENTER PASSWORD
	F2: 0	F7: 0
						<6633>
L2	F3: 0	F8: 0	R2	L2	2		5	R2
	F4: 0	F9: 0
	F5: 0	F10: 0
L3			R3	L3	3		6	R3
Figure 13: Fault Counts Screen				Figure 15: Password Screen

L1	DEGS F	ENGLISH
L2	SETUP MENU
L3	EDIT/RIGID/FLEX	INFO

R1	L1	FULL EDIT*		R1
R2	L2		EDIT OPTION	R2
		RIGID
R3	L3	FLEX		R3

Figure 14: Setup Mode Figure 16: Edit Option Screen