Changing the Display Language
NOTE: This feature is not available on all oven models.
From the setup menu screen, press R1 to change the language (Figure 14):
Info Screen
The info screen (Figure 17) is used to display the following information in an easy to access place:
-The oven’s serial number
-The oven’s electrical compartment temperature
-The oven’s voltage
-The total time the oven has been on
-The total time the oven has been idle
-The oven’s software version
To access the info screen, press R3 within the
SETUP MODE.
Test Mode
Figures
The TEST MODE serves six main purposes:
1.To test individual oven components.
2.To view oven information.
3.To reset oven parameters.
L1 | INFO |
R1 | |
SERIAL_NUMBER | RUN: 65432 HR |
EC=82F 208V | IDLE: 12345 HR |
L2 | R2 |
SOFTWARE VERSION | |
L3 | R3 |
|
|
Figure 17: Info Screen
L1 | BURNER CTRL |
|
| TOP AIR | R1 | ||
L2 | TEST PAGE 1 |
| R2 | ||||
BELT CTRL |
|
| BOT AIR | ||||
L3 | D EC27 450F | 45% | 100% | 23.9V | 0.0V | R3 | |
|
| ||||||
|
|
|
|
|
|
| |
4.To input a new serial number.
5.To perform a
NOTE: When the oven is in TEST MODE, the burner does not operate unless a
To access the TEST MODE,
1. Press the up key from the OVEN OFF or
COOLING DOWN MODE to access the
CONFIG MODE.
2.Press the R3 soft key.
3.Input the password 2 4 3 3 (Figure 20).
The TEST MODE consists of two screens (Figures 18 and 19). Use the up and down keys to navigate between them.
From screen 1 of the TEST MODE, the user can:
From screen 2 of the TEST MODE, the user can:
*The maintenance mode will show temperature, burner operation, and other diagnostics while the oven is running.
L1 | INPUT SN | 208V | R1 |
| TEST PAGE 2 |
| |
L2 | MAINT ON | R2 | |
L3 | ERASE/CLEAR | CLEAR FAULTS | R3 |
|
|
|
|
Figure 19: Test Mode Screen 2
L1 | 1 | ENTER PASSWORD | 4 | R1 |
|
|
|
| |
L2 | 2 | <2433> | 5 | R2 |
| ||||
L3 | 3 |
| 6 | R3 |
|
|
|
|
|
1 7
OVEN MODES
Figure 18: Test Mode Screen 1 | Figure 20: Password Screen |
|
|
