Ultimate Technology 500 POS manual Installation, Unpacking and Inspection

INSTALLATION

UNPACKING AND INSPECTION

1.Examine the exterior of the shipping carton for signs of abuse or damage that may have occurred during transport. Report all evidence of damage or abuse to shipper and dealer.

NOTE

If any damage may have occurred during transport, examine keyboard and accessories carefully before performing any set-up procedures. Return damaged keyboards to the dealer. See Service paragraph.

2.Open top of shipping carton and carefully remove the keyboard and accessories.

3.Remove shipping retainers and protective covers from the keyboard and accessories.

NOTE

Retain a set of shipping retainers, protective covers, and the shipping carton. Use these items whenever keyboard is to be shipped.

4.Inventory and inspect the keyboard and other accessories listed below for damage.

∙Keyboard

∙One 8-foot cable (determined by configuration ordered)

Part No. CAB20133 - 5 pin DIN keyboard cable for AT & PC/XT, Data General or

Part No. CAB20137 - 6 pin Mini DIN keyboard cable for PS2, TVI9070 or

Part No. CAB20134 - 8 pin modular keyboard cable for IBM 3151

∙Secure Magnetic Card

∙Programmer's Magnetic Card

∙Series 500 POS Keyboard Programming & User's Guide

4