Ultimate Technology 500 POS manual MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT Code HEX Sendp

Table 5. Remote Programming Mode Commands - Continued

OP	MNEMONIC/DESCRIPTION	COMMAND/ACKNOWLEDGEMENT
CODE
(HEX)
B2	SENDP	COMMAND: B2p...........<CR>
	Sends data to selected port: main	B2	= Op Code
	serial port, auxiliary serial port, or	p	= data destination port
	auxiliary keyboard port.	<CR>	= terminate command (0D hex)
		p:	0	= serial port 0 (main)
			1	= serial port 1 (auxiliary)
			2	= keyboard port 0 (main)
			3	= keyboard port 1 (auxiliary)
			4 = cash drawer 1 fire
			5	= cash drawer 2 fire
		Where data can be ASCII or CxDx (high and
		low nibble hex value) type.
		ACKNOWLEDGEMENT: NONE
B3	RDERROR	COMMAND: B3<CR>
	Sends all error information to main	B3	= Op Code
	port for output.	<CR>	= terminate command (0D hex)
		Sends all error log information contained in
		the non-volatile memory (NVRAM) out the
		main port.
		ACKNOWLEDGEMENT: NONE

46